Configuring Your Client Adapter
Table 5-1
Parameter
WEP
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
5-8
Client Adapter Configuration Parameters (continued)
Description
Specifies the type of wired equivalent privacy (WEP) that your client
adapter will use.
Options: No WEP, Static WEP Keys, or Dynamic WEP Keys
Default: No WEP
WEP
No WEP
Static WEP Keys
Dynamic WEP Keys
Chapter 5
Configuring the Client Adapter
Description
Disables WEP for your client adapter.
Enables static WEP for your client adapter
after you enter a valid WEP key.
Go to
Step 3
for instructions on
Note
entering a static WEP key and
enabling WEP.
Enables WEP keys to be derived
automatically during EAP authentication.
If you set the Network Security Type to
LEAP or EAP-FAST, Dynamic WEP Keys
is set automatically. If, on a PPC 2002
device, you set the Network Security Type
to Host Based EAP, you must set the WEP
parameter to Dynamic WEP Keys.
Note
Go to
Step 3
for instructions on
setting dynamic WEP keys.
OL-1375-04