Using Passive Mode
Using Passive Mode
Follow these steps to activate the site survey passive mode and obtain current information about RF
network traffic.
From the Profiles screen, tap the Survey tab. The Site Survey - Passive screen appears (see
Step 1
provided a client adapter is installed in the Windows CE device and is running.
Figure F-2
percentages, and
Figure F-2
Figure F-3
Cisco Aironet 350 Series Wireless LAN Client Adapters Installation and Configuration Guide for Windows CE
F-4
shows the Site Survey - Passive Mode screen with the signal strength values displayed as
Figure F-3
shows the same screen with the signal strength values displayed in dBm.
Site Survey - Passive Screen (with Signal Strength as a Percentage)
Site Survey - Passive Screen (with Signal Strength in dBm)
Appendix F
Performing a Site Survey
Figure
OL-1375-04
F-2),