E-Mail Notification - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

20.1.3 E-Mail Notification

In conjunction with using
completed. When you deploy an update, you can specify to use the e-mail notifications.
1 In ZENworks Control Center, click Configuration in the left pane, then click the Configuration
tab.
2 Click Management Zone Settings to expand its options, click Events and Messaging, then select
SMTP Settings to display the E-mail Notification panel:
Staging must be used to receive notifications, and the stage behavior must be set to one of the
following:
Advance Through Stage Automatically With Notification
Advance To Next Stage and Notify When Complete
SMTP must be configured in order for the staging e-mail configuration to work.
3 (Conditional) If you do not have SMTP configured:
3a To access the SMTP Settings page, click Configuration in the left pane, click the arrows in
the Management Zone Settings heading to expand its options, click Event and Messaging,
then select SMTP Settings.
3b In the E-mail Notification section, fill in the fields:
SMTP Server Address: Specify the DNS name or IP address of the SMTP server.
SMTP Port: Specify the SMTP server's communication port.
Use SSL: To use an encrypted SSL channel for sending e-mails. By default this option is
disabled.
SMTP Server Requires Authentication: If authentication is required, select this check
box, then specify the User and Password information.
3c Click OK to save the changes.
stages, you can set up e-mail notifications to indicate when each stage has
Configuring Updates 177