Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 333

2. Type the option number corresponding to Stop.
3. Press Enter twice.
For the External Database: Stop the Novell ZENworks Embedded Datastore Service by
stopping the Windows Services manager on Windows, or by running the
sybase-asa stop
9 At the console prompt of the database server, run the following command to start the database
service:
On Windows:
dbeng10 %ZENWORKS_HOME%\database\zenworks_ZONE_NAME.db -n
rebuild
On Linux:
dbeng10 /var/opt/novell/zenworks/database/zenworks_ZONE_NAME.db
-n rebuild
10 Create a temporary directory with the name as
within
/tmp/dbreload/
11 Run the unload command.
On Windows:
dbunload -c "UID=zenadmin;PWD=database_password;ENG=rebuild" -
an c:\dbreload\unload\zenworks_<management_zone_name>.db
On Linux:
dbunload -c "UID=zenadmin;PWD=database_password;ENG=rebuild" -an
/tmp/dbreload/unload/zenworks_<management_zone_name>.db
12 After the database rebuild has been successfully completed, take a reliable backup of the newly
built database.
If you encounter any issues during the rebuild process, contact
www.novell.com/support).
13 Stop the Novell ZENworks Embedded Datastore service by using the dbeng10 command:
On Windows: Right-click the Rebuild icon located in Windows taskbar, then click
Shutdown.
On Linux: At the console prompt, enter
14 Overwrite the database and applicable log file in the database directory with the new ones
located in the
unload
The directory is located in
unload
Linux.
15 Start the Novell ZENworks Embedded Datastore service.
For the Embedded Database: Start all the ZENworks services, including the Novell
ZENworks Embedded Datastore service:
1. At the console prompt, run the
command.
2. Type the option number corresponding to Start.
3. Press Enter twice.
For the External Database: Start the Novell ZENworks Embedded Datastore service in
the Services window on Windows, or run the
command on Linux.
16 Take a backup of the newly created database on a regular basis (daily or weekly).
command on Linux.
unload
on Linux.
q
directory (
zenworks_management_zone_name.*
c:\dbreload\
novell-zenworks-configure -c Start
within
c:\dbreload\
Novell Support (http://
.
on Windows or in
/tmp/dbreload/
/etc/init.d/sybase-asa start
Database Best Practices and Tips 333
/etc/init.d/
on Windows or
).
on