Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 104

Task
Create a server
group
Add servers to a
group
104 ZENworks 10 Configuration Management System Administration Reference
Steps
1. In the desired server list,
select the check boxes for the
servers you want to include in
the group, then click Groups >
Create Group from Selection.
or
If you want to create an empty
group, click Groups > Create
Empty Group.
You can add servers to the
empty group later using the
Groups > Add to Group option.
2. Specify a name for the group,
then click OK to add the group
to the list.
3. Click Apply to make the
change effective.
1. In the desired server list,
select the check boxes for the
servers you want to add to the
group.
2. Click Groups > Add to Group.
3. Do one of the following:
To add the selected
servers to a new group,
select Create New ,
specify a group name,
then click OK.
To add the selected
servers to an existing
group, select a group
from the list in the Select
Existing field, then click
OK.
4. Click Apply to make the
change effective.
Additional Details