Editing A Role - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

3 Browse for and select the administrators for the role, then click OK to display the Add Role
Assignment dialog box:
The Add Role Assignment dialog box is displayed so that you can define the contexts for the
role types included in the role. A context allows you to limit where granted rights can be used.
For example, you can specify that the administrator's Quick Task Rights role is limited to the
Devices folder in ZENworks Control Center.
Contexts are not required. However, if you do not specify a context, the right is not granted
because it has no information about where it can be applied.
Rights that are global automatically display
4 If necessary, assign contexts to role types where they are missing:
4a In the Types column, click a role type.
Role types that are designated with the Zone context are not clickable because they are
generally available.
4b In the subsequent Select Context dialog box, click Add and browse for a ZENworks
Control Center context.
While browsing, you can select multiple contexts in the Browse dialog box.
4c When you are finished selecting the contexts for a particular role, click OK to close the
Select Contexts dialog box.
4d Repeat Step 4a
4e When you are finished, click OK to close the Add Role Assignment dialog box.
5 To add another role, repeat
6 Click Apply to save the changes.

2.4.4 Editing a Role

You can edit a role's configuration at any time. After you apply the edited role, its changes are then
effective for any assigned administrator.
1 In ZENworks Control Center, click Configuration in the left pane, click the Configuration tab,
then in the Roles panel, click Edit to open the Edit Role dialog box:
Zone
through Step 4c as necessary to assign contexts to the roles.
Step 2 and Step 4.
as the context.
Administrators 51