Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 130

zac reg https://IP_address_of_Primary_Server:port
For more information about zac, view the zac man page (
"zac(1)" in the
This replaces the server certificate in the local cache.
7 In the
ZENworks_installation_directory\Novell\ZENworks\conf
in the
https://localhost:port_number;https://127.0.0.1:port_number
Where, port_number is the port on which the server is running.
8 Clear the ZENworks cache by running the
9 Restart the ZENworks Adaptive Agent Service.
10 Re-create all the default and custom deployment packages.
Default Deployment Packages: At the server's command prompt, enter the following
command:
novell-zenworks-configure -c CreateExtractorPacks -Z
Custom Deployment Packages: At the server's command prompt, enter the following
command:
novell-zenworks- configure -c RebuildCustomPacks -Z
Replacing the Existing Certificate with the New External Certificate on the Satellites
Perform the following tasks at the command prompt of each Satellite registered to the Primary
Server whose certificate you changed:
1 Run the following command to force the device to be unregistered locally:
zac unr -f
For more information about zac, view the zac man page (
"zac(1)" in the
2 Clear the ZENworks cache.
On Windows: Run the following commands:
zac cc
delete c:\program files\novell\zenworks\cache\zmd /s
On Linux: Run the following commands:
zac cc
rm -rf /var/opt/novell/zenworks/zmd/cache
3 Restart the ZENworks Adaptive Agent Service.
4 Restart the Proxy DHCP services on all the Satellites.
5 Run the following command to register the device in the Management Zone:
For more information about zac, view the zac man page (
"zac(1)" in the
This replaces the server certificate in the local cache.
130 ZENworks 10 Configuration Management System Administration Reference
ZENworks 10 Configuration Management Command Line Utilities
initial-web-service
/etc/opt/novell/zenworks/
ZENworks 10 Configuration Management Command Line Utilities
zac reg https://ZENworks_Server_DNS_name:port_number
ZENworks 10 Configuration Management Command Line Utilities
file, which is located in the
directory on Linux, change the first line to:
command.
zac cc
) on the device or see
man zac
directory on Windows and
) on the device or see
man zac
) on the device or see
man zac
Reference.
Reference.
Reference.