Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 326

1b Delete the contents of the
The
in the
2 On the device that has the external Sybase database installed, stop the Novell ZENworks
Embedded Datastore service.
On Windows: Do the following:
On Linux: At the console prompt, enter
3 From the device that has the external Sybase database installed, copy all files within the
database
embedded Sybase database.
The
database
/opt/novell/zenworks/
4 On the ZENworks Server that has the embedded Sybase database installed, open
zenworks_database.conf
5 On the ZENworks Server that has the embedded Sybase database installed, edit
(located in
opt/novell/zenworks/datamodel
Add the following entry:
<entry key="Embedded">true</entry>
Set the value of the
that has the embedded Sybase database installed).
Make sure that the value of the
Sybase database is running.
Set the value of the
installation of the embedded Sybase database.
(Optional) If you've specified a unique database name during the installation of the
embedded Sybase database, set the value of the
database name.
6 On the ZENworks Server that has the embedded Sybase database installed, restart the
ZENworks services:
On Windows: Do the following:
326 ZENworks 10 Configuration Management System Administration Reference
2. Double-click Administrative Tools > Services.
3. Right-click the Novell ZENworks Embedded Datastore service, then click Stop,
or select the Novell ZENworks Embedded Datastore service, then click on the
toolbar.
On Linux: At the console prompt, enter
database
directory is located in
database
/opt/novell/zenworks/
1. From the Windows desktop Start menu, click Settings > Control Panel.
2. Double-click Administrative Tools > Services.
3. Right-click the Novell ZENworks Embedded Datastore service, then click Stop, or
select the Novell ZENworks Embedded Datastore service, then click on the toolbar.
directory to the appropriate directories on the ZENworks Server that has the
directory is located in
directory on Linux.
and make sure that it contains the correct path of the database file.
ZENworks_installation_path\conf\datamodel
Server
Engine
1. From the Windows desktop Start menu, click Settings > Control Panel.
/etc/init.d/./sybase-asa stop
directory.
ZENworks_installation_path
directory on Linux.
/etc/init.d/./sybase-asa stop
ZENworks_installation_path
on Linux):
entry key to 127.0.0.1 (the IP address of the ZENworks Server
entry key is the port number on which the embedded
Port
entry key to the database server name specified during the
Database
.
on Windows and
.
on Windows and in the
zdm.xml
on Windows and in
/etc/
entry key to the unique