Moving The Data From One External Sybase To Another External Sybase - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

35.3.2 Moving the Data from One External Sybase to Another
External Sybase
In the following procedure, assume that the device you are moving the data from is EDB1 and the
device you are moving the data to is EDB2.
1 On the EDB1 device from which you want to move the data, stop the Novell ZENworks
Embedded Datastore service.
On Windows: Do the following:
On Linux: At the console prompt, enter
2 From the EDB1 device, copy
directory to the appropriate directories on the EDB2 device.
The
zenworks_database.conf
directory on Windows and in the
The
database
and in the
3 On the EDB2 device, open
correct path of the database file.
4 On the EDB1 device, edit
ZENworks_installation_path\conf\datamodel
zenworks/datamodel
Set the value of the
Make sure that the value of the
device is running.
5 On the EDB2 device, start the Novell ZENworks Embedded Datastore service:
On Windows: Do the following:
On Linux: At the console prompt, enter
6 On the EDB1 device, restart the ZENworks services:
On Windows: Do the following:
324 ZENworks 10 Configuration Management System Administration Reference
1. From the Windows desktop Start menu, click Settings > Control Panel.
2. Double-click Administrative Tools > Services.
3. Right-click the Novell ZENworks Embedded Datastore service, then click Stop, or
select the Novell ZENworks Embedded Datastore service, then click on the toolbar.
zenworks_database.conf
directory is located in
/var/opt/novell/zenworks/
zenworks_database.conf
zdm.xml
on Linux):
Server
1. From the Windows desktop Start menu, click Settings > Control Panel.
2. Double-click Administrative Tools > Services.
3. Right-click the Novell ZENworks Embedded Datastore service, then click Start, or
select the Novell ZENworks Embedded Datastore service, then click on the toolbar.
1. From the Windows desktop Start menu, click Settings > Control Panel.
2. Double-click Administrative Tools > Services.
3. Start the following services: Novell ZENworks Server, Novell ZENworks Services
Monitor, and Novell ZENworks Agent Service.
/etc/init.d/./sybase-asa stop
is located in the
ZENworks_installation_path\conf\
/etc/opt/novell/zenworks/
ZENworks_installation_path
directory on Linux.
and make sure that it contains the
(located in
on Windows and in
entry key to the IP address of the EDB2 device.
entry key is the port number on which the EDB2
Port
/etc/init.d/./sybase-asa start
.
and all files within the
database
directory on Linux.
by default on Windows
/etc/opt/novell/
.