Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 115

Task Steps
Remove a group
8c (Conditional) If you have ZENworks Servers or Satellites that are clustered behind an L4
switch, you can define the L4 switch and add the servers to the definition. This enables the
L4 switch to continue to balance the traffic among those servers.
Task Steps
Create an L4
switch definition
1. In the server list, select the
check box for the group you
want to remove.
2. Click Groups > Remove
Group, then click OK.
3. Click Apply to make the
change effective.
1. In the server list, select the
check boxes for the servers to
include in the L4 switch
definition, then click L4 Switch
> Create L4 Switch Definition
from Selection.
or
If you want to create an empty
L4 switch definition, click L4
Switch > Create Empty.
You can add servers to the
empty definition later using the
L4 Switch > Add to L4 Switch
Definition option.
2. Specify the DNS name or the
IP address of the L4 switch,
then click OK to add the L4
switch to the list.
3. Click Apply to make the
change effective.
Additional Details
The group's servers are not
removed, only the group.
Additional Details
Closest Server Rules 115