Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual page 93

Unable to add a Satellite with the Imaging role to a Windows managed device by
using the zman ssc command
Source: ZENworks 10 Configuration Management; Satellite.
Action: To promote a Windows managed device to be a Satellite with the Imaging role,
use the
For more information about the
page (
ZENworks 10 Configuration Management Command Line Utilities
Unable to remove a Satellite with the Imaging role from a Windows device by using
the zman ssd command
Source: ZENworks 10 Configuration Management; Satellite.
Action: To remove the Imaging Satellite role from a Windows managed device, use the
zman ssrimg
This command does not remove other Satellite roles such as Content or
Collection if they are assigned to the device.
For more information about the
page (
ZENworks 10 Configuration Management Command Line Utilities
The managed device is not promoted to the Imaging Satellite role even though the
role has been assigned to it
Source: ZENworks 10 Configuration Management; Satellite.
Possible Cause: The managed device is unable to contact the Primary Server because of the
firewall settings configured on the managed device.
Action: Do the following on the managed device:
1 Disable the firewall settings.
2 Ping the Primary Server to make sure that the managed device can contact
3 Refresh the information on the
Updated Imaging statistics are not displayed on the ZENworks icon when a Windows
Vista SP2 managed device is promoted to be a Satellite with the Imaging role
Source: ZENworks 10 Configuration Management; Satellite.
Explanation: When you promote a Windows Vista SP2 managed device to be a Satellite
with the Imaging role, any updated Imaging statistics are not displayed on the
Action: To view the latest Imaging statistics on the Satellite:
1 At the console prompt, go to
command.
zman ssaimg
) on the ZENworks Server or see
man zman
command.
) on the ZENworks Server or see
man zman
the server.
clicking Refresh.
icon (Show Properties > Satellite > Imaging)
ZENworks_installation_directory\novell\zenworks\bin\prebo
.
ot
command, view the zman man
zman ssaimg
"Satellite
command, view the zman man
zman ssrimg
"Satellite
icon by right-clicking the icon, then
Commands" in the
Reference.
Commands" in the
Reference.
Satellites 93