Changing The Dns Name Or The Ip Address And Dns Name Of The Primary Server After Installing Zenworks 10 Configuration Management - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

6 If the database is located on the Primary Server whose IP address you changed in
must change the database server address on all the second Primary Servers. On all the second
Primary Servers, change the value of database server address in the
ZENworks_Installation_Directory\Novell\ZENworks\conf\datamodel\zdm.xml
point to the new IP address of the first Primary Server.
7 Restart the ZENworks Adaptive Agent.
8 Restart the Proxy DHCP services on all the Satellites.
11.3.3 Changing the DNS Name or the IP Address and DNS
Name of the Primary Server after Installing ZENworks 10
Configuration Management
If you want to change only the DNS name or if you want to change both the IP address and DNS
name of the Primary Server after installing ZENworks 10 Configuration Management SP3, and if
the certificate's CN has fully qualified DNS configured, use the following steps to change only the
DNS name or to change both the IP address and DNS name of the Primary Server:
NOTE: This scenario has been tested only on the Windows Primary Server and the embedded
Sybase database. In this setup, the DNS and DHCP servers are configured on the same device.
1 Before changing the IP address of the Primary Server, take a reliable backup of the following
on all the Primary Servers in the Management Zone:
Content-Repo Directory: The
ZENworks_installation_directory\work
opt/novell/zenworks/
Ensure that the
successfully backed up.
Certificate Authority: For detailed information on how to take a backup of the
Certificate Authority, see
page 121.
Embedded Database: For detailed information on how to take a backup of the Embedded
database, see Section 34.3, "Backing Up the Embedded Sybase SQL Anywhere
Database," on page
2 Do one of the following:
Change the IP address and the DNS name of the Primary Server.
Change the DNS name only of the Primary Server.
3 Reboot the Primary Server.
4 Ensure that the DNS entry of the Primary Server has been updated with the new DNS name.
5 Create a Certificate Signing Request (CSR) by providing the hostname of the Primary Server as
the subject.
For more information on how to create a CSR, see
in the ZENworks 10 Configuration Management Installation
content-repo
on Linux.
directory located within the
images
Section 10.3, "Backing Up the Certificate Authority," on
295.
directory is located by default in the
directory on Windows and in the
directory has been
content-repo
"Creating an External Certificate
Guide.
Step 2, you
to
/var/
Authority"
Disaster Recovery 133