Zenworks Services On A Linux Server - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

6.2 ZENworks Services on a Linux Server

When it is running on a Linux server, the ZENworks Server includes the services listed in the
following table. All services are always installed regardless of the ZENworks 10 products
(Configuration Management, Asset Management, and Patch Management) you have licensed and
activated. If a service is not required for your product, it is disabled
ZENworks Services on Linux
Table 6-2
Service
Proxy DHCP Service
TFTP Service
ZENworks Agent Service
ZENworks Datastore
ZENworks Loader
ZENworks Preboot Policy Service novell-zmgprebootpolicy
ZENworks Preboot Service
ZENworks Server
ZENworks Services Monitor
ZENworks Imaging Agent
The services reside in the
help you control the ZENworks services:
Section 6.2.1, "Checking the Status of a ZENworks Service," on page 74
Section 6.2.2, "Starting the ZENworks Services," on page 74
Service Name
novell-proxydhcp
novell-tftp
novell-zmd
sybase-asa
novell-zenloader
novell-pbserv
novell-zenserver
novell-zenmntr
novell-zenagent
directory. Refer to the following sections for instructions to
/etc/init.d
Description
Used with a standard DHCP server to
inform PXE-enabled devices of the IP
address of the Novell TFTP server.
Used by PXE-enabled devices to
request files that are needed to perform
imaging tasks.
Used to enable the server as a managed
device.
Used to run the embedded SQL
Anywhere* database.
Used for loading and controlling the Java
services that perform ZENworks Server
tasks.
Used by PXE-enabled devices to check
for assigned preboot policies and work.
Used to provide imaging services to a
device. This includes sending and
receiving image files, discovering
assigned Preboot bundles, acting as
session master for multicast imaging,
and so forth.
Used for communicating with the
ZENworks Adaptive Agent.
Used to monitor the status of the
ZENworks services.
Used to save and restore image-safe
data on the server (as a managed
device). Only runs when launched by the
ZENworks Adaptive Agent.
ZENworks Server 73