Refreshing Devices - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

For example, if you click the link in the Pending column, you see the status of devices on
which the deployment is pending, as in the following figure:
3 Select the check box next to one or more devices.
4 Click Action > Reschedule Devices.
The options available from the Action menu vary, depending on whether you are viewing the
All Assigned Devices Status panel, the Devices with Pending Status panel, or the Devices with
Failed Status panel. If you are viewing the Devices with Success Status panel, no options are
available.
The Reschedule Devices option displays only when the update deployment is scheduled. If the
update has a schedule of Now, this option is not available.

22.8.7 Refreshing Devices

1 In ZENworks Control Center, click Configuration in the left pane, then click the System
Updates tab.
2 In the Deploying System Updates panel, click an underlined link in the Update Name, Stage,
Pending, Successful, or Failed column to display the appropriate Status by Device page.
For example, if you click the link in the Pending column, you see the status of devices on
which the deployment is pending, as in the following figure:
3 Select the check box next to one or more devices.
4 Click Action > Refresh Device.
The options available from the Action menu vary, depending on whether you are viewing the
All Assigned Devices Status panel, the Devices with Pending Status panel, or the Devices with
Failed Status panel. If you are viewing the Devices with Success Status panel, no options are
available.
Deploying Updates 211