Preparing To Move The Data; Moving The Data From The Internal Sybase To The External Sybase - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - SYSTEM ADMINISTRATION REFERENCE 10.3 16-04-2010 System Administration Manual

34.5.1 Preparing to Move the Data

Before moving the data from an internal Sybase database to an external Sybase database, do the
following:
Make sure that ZENworks 10 Configuration Management is installed with an internal Sybase
database on a Windows or Linux device.
Install the external Sybase database. For more information on how to install an external Sybase
database, see "Installing an External ZENworks
Management Installation
34.5.2 Moving the Data from the Internal Sybase to the External
Sybase
1 On the device that has the external Sybase database installed, stop the Novell ZENworks
Embedded Datastore service.
On Windows: Do the following:
1. From the Windows desktop Start menu, click Settings > Control Panel.
2. Double-click Administrative Tools > Services.
3. Right-click the Novell ZENworks Embedded Datastore service, then click Stop, or
select the Novell ZENworks Embedded Datastore service, then click on the toolbar.
On Linux: At the console prompt, enter
2 From the device that has the internal Sybase database installed, copy
zenworks_database.conf
directories on the device that has the external Sybase database.
The
zenworks_database.conf
directory on Windows and in the
The directory is located in
database
/var/opt/novell/zenworks/
3 On the device that has the external Sybase database installed, open
and make sure that it contains the correct path of the database file.
4 On the device that has the internal Sybase database installed, edit
ZENworks_installation_path\conf\datamodel
zenworks/datamodel
Change the value of the
Set the value of the
Sybase database installed.
Make sure that the value of the
Sybase database is running.
5 On the device that has the external Sybase database installed, start the Novell ZENworks
Embedded Datastore service.
On Windows: Do the following:
1. From the Windows desktop Start menu, click Settings > Control Panel.
Guide.
/etc/init.d/./sybase-asa stop
and all files within the
is located in the
/etc/opt/novell/zenworks/
ZENworks_installation_path
directory on Linux.
on Linux):
entry key to
Embedded
entry key to the IP address of the device that has the external
Server
entry key is the port number on which the external
Port
Database" in the ZENworks 10 Configuration
directory to the appropriate
database
ZENworks_installation_path\conf\
directory on Linux.
on Windows and in the
zenworks_database.conf
zdm.xml
on Windows and in
. By default, it is
false
Embedded Database Maintenance 303
.
(located in
/etc/opt/novell/
.
true