Taking An Image - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

You can freely downloaded WAIK from the
www.microsoft.com/downloads/details.aspx?FamilyID=c7d4bc6d-15f3-4284-9123-
679830d629f2&displaylang=en).
2 (Conditional) If you want to run ZENworks Control Center on a 64-bit device, append the
WAIK_installation_path\Windows AIK\Tools\x86
environment variable.
3 Configure the third-party Imaging settings in ZENworks Control Center.
3a In ZENworks Control Center, click Configuration tab.
3b In the Management Zone Settings panel, click Device Management > Preboot Services >
the Third-Party Imaging Settings panel.
3c In the Upload WinPE Base Distribution (Requires Windows Automation Installation Kit)
option, click
box, do the following
3c1 Click Browse to browse for and select
3c2 Click OK.
3d In the Upload ImageX Files to Support WIM Imaging (ImageX.EXE) option, click
browse for and select the Microsoft Imaging engine (
running ZENworks Control Center. By default,
\waik\tools\x86
3e In the Upload Ghost 11.5 or higher files to support Ghost imaging(Ghost32.exe) option,
click
along with the Ghost solution on any device in your network.
3f After configuring the third-party Imaging settings, click Apply.
3g Click Status to view the status of content replication across all Primary Servers in the
Management Zone. You must start the Imaging operation only when the status is
Available.
IMPORTANT: You must start the Imaging operation only when the status is Available.
4 Enable PXE on the device.
5 Ensure that you have a standard DHCP server, either on your Imaging Server or on another
network server.

4.3.2 Taking an Image

1 In ZENworks Control Center, click the Devices tab.
2 Navigate the
want to take.
3 Click the device to display its details.
46 ZENworks 10 Configuration Management Administration Quick Start
to upload the WIM Imaging file. In the Upload WIM Imaging Files dialog
By default, is installed in
winpe.wim
NOTE: If you have not installed the Novell File Upload extension on this device,
you must do so before you can browse to and upload directories to be installed.
This downloads the Imaging files from server to the device running ZENworks
Control Center and also uploads files from the device to the server. The progress of
download and upload of files is displayed in the Status field.
.
to browse for and select the Symantec Ghost engine (
or
Servers Workstations
Microsoft Download Center Web site (http://
to the
Path
.
winpe.wim
\waik\tools\petools\x86
imagex.exe
is installed in
imagex.exe
folder until you locate the device whose image you
Windows system
.
to
) installed on the device
) installed
ghost32.exe