Modifying Configuration Settings On A Device - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

4 Click the Settings tab.
5 In the Settings panel, click the settings category (Content, Device Management, Infrastructure
Management, and so forth) whose settings you want to modify.
6 Click the setting to display its details page.
7 Modify the setting as desired.
For information about the setting, see
ZENworks 10 Configuration Management System Administration Reference
button in ZENworks Control Center.
8 When you have finished modifying the setting, click OK (or Apply) to save your changes.
The configuration setting is inherited by all devices in the folder, including any devices
contained in subfolders, unless the setting is overridden on a subfolder or individual device.

3.5.3 Modifying Configuration Settings on a Device

1 In ZENworks Control Center, click the Devices tab.
2 In the Devices panel (on the Managed tab), browse for the device whose settings you want to
modify.
3 When you've found the device, click the device name to display the its details.
4 Click the Settings tab.
5 In the Settings panel, click the settings category (Content, Device Management, Infrastructure
Management, and so forth) whose settings you want to modify.
38 ZENworks 10 Configuration Management Administration Quick Start
"Management Zone Configuration Settings" in the
or click the Help