Promoting A Managed Device To Be A Satellite - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

3 In the Agent Features panel:
If you do not want to install a feature, deselect Installed next to a feature. The selected
feature is not installed on the device. If you choose to deselect all the features, then only
the core agent is installed.
If you want to install but disable a feature, select Installed and Disabled next to a
feature.The disabled feature is not uninstalled from the currently managed devices. The
feature is installed on the device, but it is nonfunctional.
The installation of Bundle Management, Remote Management, or User Management features
requires a reboot of your device. The installation of Image Management feature requires a
reboot only on Windows 2008 and Windows Vista. You are prompted to reboot your device
based on the selected reboot option.
You can now proceed to deploy the agent to a device manually or by using a task.
For information on how to deploy the agent by using a task, see
Agent". For information on how to deploy the agent manually, see
Agent".
4 To save the changes, click Apply.

5.4.4 Promoting a Managed Device to be a Satellite

A Satellite is a managed device that can perform some of the roles that a ZENworks
Server normally performs, including authentication, information collection, content distribution, and
imaging. A Satellite can be any managed Windows device (server or workstation) or any Linux
device, but not a Primary Server. When you configure a Satellite, you specify which roles it
"Using a Task to Deploy the
"Manually Deploying the
®
Primary
ZENworks Adaptive Agent Deployment 95