Zac Command Line Utility; Help With Commands; Location; Syntax - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

where
bundle-assign
this example, the options are device type (workstation), bundle name (bundle1), and target device
(wks1).

2.2.3 Help with Commands

The best way to understand the commands is to use the online help or see "zman(1)" in the
ZENworks 10 Configuration Management Command Line Utilities
To use the online help:
1 On the ZENworks Server, enter
This command displays the basic usage (syntax) and a list of the available command categories.
You can also use the following to get help:
Command
zman --help | more
zman category --help | more
zman command --help | more

2.3 zac Command Line Utility

The zac utility provides a command line management interface that lets you perform tasks available
in the ZENworks Adaptive Agent.
Section 2.3.1, "Location," on page 18
Section 2.3.2, "Syntax," on page 18
Section 2.3.3, "Help with Commands," on page 19

2.3.1 Location

The utility is installed on all Windows managed devices in the following location:
%ZENWORKS_HOME%\bin
where
%ZENWORKS_HOME%
c:\program files\novell\zenworks\bin
(x86)\novell\zenworks\bin

2.3.2 Syntax

The zac utility uses the following basic syntax:
zac command options
For example, to launch a bundle on a device, you use the following command:
zac bundle-launch "bundle 1"
18 ZENworks 10 Configuration Management Administration Quick Start
is the category-action and
zman --help
Description
Displays a complete list of commands by category.
Displays a complete list of commands within a category.
Displays help for a command
represents the ZENworks installation path. The default path is
on a 32-bit Windows device and
on a 64-bit Windows device.
workstation bundle1 wks1
Reference.
at a command prompt.
are the options. In
c:\program files