Where To Find More Information; Remotely Managing Devices; Section 4.4, "Remotely Managing Devices - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

Wizard Page
Bundle Groups page
Add Assignments page
Schedules page
Finish page
Initiating the Imaging Work
1 In ZENworks Control Center, click the Devices tab.
2 Navigate the
apply the image.
3 Click the device to display its details.
4 In the task list located in the left navigation pane, click Apply Assigned Imaging Bundle to
schedule the work.
Because imaging tasks are completed by Preboot Services, the image is applied to the device
the next time the device reboots. The Imaging Work panel, located on the device's Summary
page, shows that the work is scheduled. When the work is completed, the task is removed from
this panel.
5 To reboot the device immediately and initiate the imaging work, click Reboot/Shutdown
Workstation (or Reboot/Shutdown Server) in the left navigation panel.

4.3.4 Where to Find More Information

For more information about imaging and Preboot Services, see the
Management Preboot Services and Imaging

4.4 Remotely Managing Devices

ZENworks Configuration Management provides Remote Management functionality that lets you
remotely manage devices. Remote Management supports the following operations:
Remote Control: Lets you control a managed device from the management console so you can
provide user assistance and help resolve problems. You can perform all the operations that a
user can perform on the device.
Remote View: Lets you connect with a managed device so that you can view the managed
device instead of controlling it. This helps you troubleshoot problems that the user
encountered. For example, you can observe how the user at a managed device performs certain
tasks to make sure that the user performs a task correctly
Remote Execute: Lets you run any executable on a managed device from the management
console.To remotely execute an application, specify the executable name in the Remote
Execute dialog box. If the application is not in the system path on the managed device, then
52 ZENworks 10 Configuration Management Administration Quick Start
Details
You should not assign the image bundle to any groups. Click Next to
bypass this page.
Select the device where you want to apply the image.
You should not assign a schedule to the image bundle. Click Next to
bypass this page.
Click Finish to create the bundle and assign it to the selected
device.
or
Servers Workstations
folder until you locate the device where you want to
ZENworks 10 Configuration
Reference.