Management Tools Quick View; Zenworks Control Center; Accessing Zenworks Control Center - Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - ADMINISTRATION QUICK START 10.3 Quick Start Manual

Management Tools Quick View

2
® ®
Novell ZENworks 10 Configuration Management provides both a Web-based console
(ZENworks Control Center) and a command line utility (zman) that you can use to manage your
ZENworks system. The following sections explain how to access and use the management tools:
Section 2.1, "ZENworks Control Center," on page 15
Section 2.2, "zman Command Line Utility," on page 17
Section 2.3, "zac Command Line Utility," on page 18

2.1 ZENworks Control Center

ZENworks Control Center is installed on all ZENworks Servers in the Management Zone. You can
perform all management tasks on any ZENworks Server.
Section 2.1.1, "Accessing ZENworks Control Center," on page 15
Section 2.1.2, "Navigating ZENworks Control Center," on page 16

2.1.1 Accessing ZENworks Control Center

1 Using a Web browser that meets the requirements listed in
Requirements" in the
following URL:
https://ZENworks_Server_Address:port
Replace ZENworks_Server_Address with the IP address or DNS name of the ZENworks
Server. You only need to specify the port if you are not using one of the default ports (80 or
443). ZENworks Control Center requires an HTTPS connection; HTTP requests are redirected
to HTTPS.
The login dialog box is displayed.
2 In the Username field, type
3 In the Password field, type the Administrator password created during installation.
ZENworks 10 Configuration Management Installation
.
Administrator
"Administration Browser
Guide, enter the
Management Tools Quick View
2
15