Starting From The Windows Nt Services Panel - Netscape MANAGEMENT SYSTEM 4.5 Installation And Setup Manual

At the command-line prompt, enter the following line:
3.
<server_root>/cert-<instance_id>/start-cert[.bat]
specifies the file extension; this is required only when running the
.bat
utility on a Windows NT system.
<server_root>
specified this directory during installation.
<instance_id>
System. You first specified this when you installed this server.
When prompted, enter the single sign-on password.
4.
Certificate Management System won't start until you provide this password.
For more information, see "Required Start-up Information" on page 312.
If Certificate Management System is already running, the start-up
NOTE
command fails. Stop the server first using the
command, then use the

Starting From the Windows NT Services Panel

If you have installed Certificate Management System on a Windows NT system,
you can start the server (as a service) from the Windows NT Services panel (see
Figure 8-1). The CMS service has the following name:
Netscape CMS (<instance_id>)
Figure 8-1 CMS service in the Windows NT Services panel
is the directory where the CMS binaries are kept. You first
is the ID for this instance of Certificate Management
start-cert
Chapter 8
Starting Certificate Management System
stop-cert
command.
Starting and Stopping CMS Instances 319