Station Speed Dial Numbers; Universal Night Answer - Vertical SBX IP 320 User Manual

-
4 18
Chapter 4: Using a Single Line Telephone (SLT)

Station Speed Dial Numbers

Speed Dials can be programmed to dial directly to another person's phone
number (for external calls) or extension (for internal calls). Your System
Administrator may have speed dial numbers programmed for use by anyone
in the system (known as System Speed Dial Numbers). However, you may
also be able to set up your own list of speed dial numbers for your own use
(known as Station Speed Dial Numbers).
Note: Speed Dial Numbers are also known as Speed Bins, and may be
designated as
Programming Station Speed Dial Numbers
1. Lift the handset.
2. Dial 555.
3. Enter a speed dial number (000 to 099).
4. Enter the number you want to associate with the speed dial number you
set in step 3.
- This is the number that will be dialed when you enter the
speed dial number/bin.
5. Press the hook-switch.
When you hear the (confirmation) tone:
6. Hang up.
Station Speed Dial Numbers - Using
1. Lift handset.
2. Dial 558.
3. Enter the speed dial number (000-099) associated with the number you
want to dial (see step 4 above).

Universal Night Answer

When you hear an incoming call on another phone or night bell:
1. Lift the handset.
2. Enter the UNA Access Code 569 to be connected to the incoming call if it
was programmed as an UNA line.
Note:
000 to 099
Contact your System Administrator for details about UNA lines.
SBX IP 320 Phone User Guide
Using Features and Functions