Fixed, Pre-Programmed, & Flex Buttons - Vertical SBX IP 320 User Manual

Using the Basics
A new message for the VMIB or external voice mail is defined as a message
in the mailbox which has not yet been played to the subscriber.
A saved message is defined as a message in the mailbox which has been
played to the subscriber, but has not been deleted or moved.
A station message wait request is defined as the MWI request left by another
intercom station without a voice message, by pressing the Call Back button
when ringing a busy or unanswered station.
Fixed, Pre-programmed, & Flex Buttons
This 8-Button phone has Fixed, Pre-programmed (sometimes also known as
Feature), and Flex buttons. These buttons are used to access and perform
various tasks and functions. Some may be used in conjunction with other
buttons.
• Fixed buttons are those that are permanently labeled on the phone
hardware. Such buttons might include SPEAKER, TRANS, HOLD,
VOLUME, etc.
• Pre-programmed buttons are those buttons that are pre-programmed by
your System Administrator. Their names/functions will be on a more
temporary-type template that can be replaced if/when the buttons are
reprogrammed, etc.
• Flex buttons are also known as "User Programmable" buttons (see
"Programming Flex Buttons" on page 2-30). In addition, Flex buttons that
are programmed to access the dial tone, are also known as "line buttons".
Chapter 3: Using the 8-Button Digital Phone
SBX IP 320 Phone User Guide
-
3 5