Saved Number Redial; Feature; Speed Dial Extension System - Vertical Edge 120 User Manual

Saved Number Redial

Saved Number Redial is normally used whenever you want to retain a
telephone number to be dialed later. The same feature code is used to
Save a Dialed Number (SDN) and to dial the saved number – Saved
Number Redial (SNR).
Operation – SDN
1. After you've placed an outside line call for which you want to
store the number, press FEATURE
2. The dialed number is stored in the Saved Number memory.
Operation – SNR
1. When the telephone is idle, press the FEATURE button
designated as REDIAL (if available) or press FEATURE
2. The stored number is dialed.
Speed Dial
Speed Dialing allows you to store frequently dialed numbers. There
are 20 speed "bins" for most extensions and 200 system speed bins
that may be shared by all extensions.
Operation – Setup
Press FEATURE
1.
2. Dial the Speed Dial location number (
3. Press [show]. The current contents are displayed.
4. Press [chg].
5. Input the number you want to store, including Pauses (FEATURE
), Flash FEATURE
codes.
6. Press [save]. That number is stored in this speed dial location.
7. Continue programming speed dial locations from step 2 above or
hang-up (press SPK twice) to exit.
Edge 120 Digital Executive Telephone User Guide
Extension
System
.
and Pulse To Tone Conversion (

FEATURE

.
–
–
–
.
).
)
Page 15