Vertical SBX IP 320 User Manual page 118

-
A 2
Appendix A: User Programming Map
Map
[1] Ring
[1] Station Ring Type - dial (1-4)
[2] Answer Mode - dial (1-3); HTP
[3] SMS Msg Display
[4] Enblock Mode - dial 1, ON; dial 0, OFF*
[5] SMS / Notice Display - (Invalid)
[6] Scroll Speed - (Invalid)
[7] Ear-Mic Headset - dial 1, ON; dial 0, OFF
[8] ICM Bell - dial (01-15)
[9] CO Bell - dial (01-15)
[#] PTT Group - (Invalid)
[2] COS*
[1] COS Down
[2] COS Restore
[3] Walking COS - enter COS override code
[4] COS Change - (Invalid)
[5] SMS Inbox (000/000) - (Invalid)
[6] Del All SMS Msgs - (Invalid)
[3] Auth / Mobile-Ext
[1] Auth Register - (Invalid)
[2] Auth Change - enter current password
[3] Reg Mobile-Ext - (Access Denied)
[4] Active Mobile-Ext - (Access Denied)
[5] Reg Mobile-Ext CLI - (Access Denied)
[6] Active Mobile Hunt - (Access Denied)
[7] MW to Mobile-Ext - dial 1, ON; dial 0, OFF
[4] Time / Conf-Room
[1] Set Wake Up Time - dial HH:MM
[2] Wake Up Disable - dial HH:MM
[3] Active Conf-Room - dial 1-9 and password*
[4] Deactive Conf-Room - dial 1-9 and password*
[5] Call Cover Attr
[1] Call Coverage Mode - dial 1, ON; dial 0, OFF
[2] Delay Ring Cycle - dial 0-9
SBX IP 320 Phone User Guide
Using the Map
(continued on next page)