Vertical SBX IP 320 User Manual page 32

-
2 16
Chapter 2: Using the 24-Button Digital Phone
Using the Headset
Once you set the headset mode, you can toggle between the handset and the
headset in the same way you toggle between the handset and speaker (see
"Switch between Handset and Speaker" on page 2-14).
Press SPEAKER to toggle between using the handset and the headset.
Adjusting the Volume on the Headset
While on a call:
Use the VOLUME down (-) and up (+) to adjust the volume of
the caller's voice.
Using a Headset with a 2.5 mm Headset Jack (Ear/Mic)
If you are using a special headset that has a 2.5mm headset jack, (that is
Ear/Mic units) a special setting in addition to the basic Headset Mode setting
is required.
Note: Contact your System Administrator to find out if the headset you are
using requires this additional setting.
Follow the steps 1 through 6 for Setting the Headset Mode.
7. Use
access the Programming
Menu.
8. Use
scroll to the
PROGRAM
9. Press the
select the
PROGRAM
10. Use
When you see the EAR/MIC PROGRAM option:
11. Press the
select the option.
on the Nav Button to
on the Nav Button to
ADVANCED
option.
OK
soft button to
ADVANCED
option.
on the Nav button to scroll through the options.
OK
soft button to
SBX IP 320 Phone User Guide
1. BAS IC P RO G R AM
2. ADVA N CE D PROGR A M
5. EA R/M I C P RO G R A M
B AC K
(continued on next page)
Using the Basics
OK
OK