Vertical SBX IP 320 User Manual page 19

Using the Basics
Phone Buttons and Features
Feature
1 Headphone Jack
2 Handset
3 Speaker
4 LCD Display
5 Soft Buttons (3)
6 Ring LED
7 Pre-Programmed/
Flexible Buttons (24)
8 Microphone (MIC)
9 SPEED Button
DND Button
TRANS/PGM Button
CALL BACK Button
10 Nav Button
11 VOLUME Button
12 HOLD/SAVE Button
13 Dialpad
14 SPEAKER Button
Chapter 2: Using the 24-Button Digital Phone
Used to...
speak to a caller when using a headset instead of
holding the handset.
answer/make internal or external calls.
hear the other party during a call without using the
handset or headset (hands-free mode).
display phone status information, dialing directories,
and test message information.
work in conjunction with fixed and flexible features
options that appear on the display.
indicate when the phone is ringing.
access external line calls, pre-assigned features, or
user defined feature code assignments.
used to speak to a caller when in speaker mode.
access speed dialing, saved number redial, and last
number redial. Button is also used to access
flexible button programming.
activate a "do not ring this phone" mode. When DND
is active, this button is red.
Note: When you make a Forward call setting (other
than forwarding to voice mail), this light will
Flash. You can press it to easily cancel those
Forward settings.
set up a conference call or transfer a call.
initiate a call back request for another busy station.
navigate through (and make selections on) the
display/menus.
decrease (-) or increase (+) the volume level of the
speaker or handset while on a call.
put a call on hold or save the current User
Programming setting.
dial phone numbers and make entries on the display.
toggle between speaker (or headset) mode and
handset mode. You can also use this button to exit
any menu screen.
Note: The button is red when speakerphone
is active.
SBX IP 320 Phone User Guide
-
2 3