Set Host Channel - Dell PowerVault MD3220 Cli Manual

Parameter
userLabel
hostType
Host Group Parameter
hostGroupName
none
defaultGroup
NOTE:
When you use this command, you can specify one or more of the optional
parameters. You do not, however, need to use all of the parameters.
NOTE:
You can use any combination of alphanumeric characters, hyphens, and
underscores for the names. Command names can have a maximum of 30
characters. If you exceed the maximum character limit, replace square brackets
([ ]) with angle brackets (< >) to overcome this limitation.

Set Host Channel

This command defines the loop ID for the host channel.
192
Script Commands
Description
The new host name. Enclose the host name in double quotation
marks (" ").
The index label or number of the host type for the HBA host port.
Use the show storageArray hostTypeTable command to generate a list
of available host type identifiers. If the host type has special
characters, enclose it in double quotation marks (" ").
Host Has Individual Virtual
Disk-to-LUN Mappings
The host is removed from
the present host group and is
placed under the new host
group defined by
hostGroupName.
The host is removed from
the host group as an
independent partition and is
placed under the root node.
The command fails.
Host Does Not Have Individual
Virtual Disk-to-LUN Mappings
The host is removed from the
present host group and is
placed under the new host
group defined by
hostGroupName.
The host is removed from the
present host group and is
placed under the default
group.
The host is removed from the
present host group and is
placed under the default
group.