Dell PowerVault MD3220 Cli Manual page 209

Parameter
password
userLabel
isnsRegistration
Additional Information
When you use this command, you can specify one or more of the
optional parameters.
Auto Support Data
When enabled, the set storageArray autoSupportConfig command causes all
configuration and state information for the storage array to be returned each
time a critical Major Event Log (MEL) event is detected. The configuration
and state information is returned in the form of an object graph. The object
graph contains all relevant logical and physical objects and their associated
state information for the storage array.
The set storageArray autoSupportConfig command collects configuration
and state information in this way:
• Automatic collection of the configuration and state information occurs
every 72 hours. The configuration and state information is saved to the
storage array zip archive file. The archive file has a time stamp that is used
to manage the archive files.
• Two storage array zip archive files are maintained for each storage array.
The zip archive files are kept on a physical disk. After the 72-hour time
period is exceeded, the oldest archive file is always overwritten during the
new cycle.
• After you enable automatic collection of the configuration and state
informationusing this command, an initial collection of information starts.
Collecting information after the you issue the command makes sure that
one archive file is available and starts the time stamp cycle.
Description
The password for the storage array. Enclose the
password in double quotation marks (" ").
The name for the storage array. Enclose the storage
array name in double quotation marks (" ").
The method to register the iSCSI target with the
iSNS server. Set the parameter to TRUE to
enable registration. Set the parameter to FALSE
to disable registration.
Script Commands
209