Save Storage Array Performance Statistics - Dell PowerVault MD3220 Cli Manual

Parameters
Parameter
raw
baseline
file
NOTE:
If you have not reset the iSCSI baseline statistics since the RAID controller
module start-of-day, the time at the start-of-day is the default baseline time.

Save Storage Array Performance Statistics

This command saves the performance statistics to a file. Before you use this
command, issue the set session performanceMonitorInterval and set session
performanceMonitorIterations commands to specify how often statistics are
collected.
Syntax
save storageArray performanceStats file="filename"
Parameter
Parameter
file
Description
This parameter defines that the statistics collected are all
statistics from the RAID controller module start-of-day.
Enclose the parameter in square brackets ([ ]).
This parameter defines that the statistics collected are all
statistics from the time the RAID controller modules were
reset to zero using the reset storageArray iscsiStatsBaseline
command. Enclose the parameter in square brackets ([ ]).
The name of the file to which you want to save the
performance statistics. Enclose the file name in double
quotation marks (" ").
NOTE:
This command does not automatically append a file
extension to the new file. You must specify the file extension
when you enter the file name.
Description
Name of the file to which to save the performance
statistics. You must put quotation marks (" ") around
the file name.
Script Commands
185