Dell PowerVault MD3220 Cli Manual page 206

Parameters
Parameter
virtualDisk or
virtualDisks
userLabel
warningThresholdPerce
nt
repositoryFullPolicy
NOTE:
When you use this command, you can specify one or more of the optional
parameters. You can use any combination of alphanumeric characters, hyphens,
and underscores for the names. Names can have a maximum of 30 characters.
NOTE:
You can set the warningThresholdPercent parameter and the
repositoryFullPolicy parameter for both the snapshot repository virtual disk or the
snapshot virtual disk.
206
Script Commands
Description
The name of the specific snapshot virtual disk for
which you want to define properties. (You can
enter more than one virtual disk name if you use
the virtualDisks parameter). Enclose the
snapshot virtual disk name in double quotation
marks (" ") inside of square brackets ([ ]).
A new name that you want to give to a snapshot
virtual disk. Enclose the new snapshot virtual disk
name in double quotation marks (" ").
The percentage of repository capacity at which
you receive a warning that the snapshot
repository is nearing full. Use integer values. For
example, a value of 70 means 70 percent. The
default value is 50.
How you want snapshot processing to continue if
the snapshot repository virtual disk is full. You
can choose to fail writes to the source virtual disk
(failSourceWrites) or fail writes to the snapshot
virtual disk (failSnapshot). The default value is
failSnapshot.