Dell PowerVault MD3220 Cli Manual page 193

Syntax
set hostChannel [hostChannelNumber]
preferredID=portID
Parameters
Parameter
hostChannel
preferredID
Description
The identifier number of the host channel for
which you want to set the loop ID.
The host channel identifier number is
constructed by combining the controller number
and the host channel number. Enclose the host
channel identifier number in square brackets ([
]). Separate the controller number from the host
channel number with a comma.
For example, the identifier number for host
channel 2 on controller 0 would be [0,2].
The port identifier for the specified host port.
Port ID values are 0 to 127.
Script Commands
193