Dell PowerVault MD3220 Cli Manual page 159

Parameters
Parameter
enclosure
file
Description
Identifies the enclosure to which to load
new firmware. Enclosure ID values are 0
to 99. You must put brackets ([ ]) around
the enclosure ID value.
You can use the following parameters:
allEnclosures
• The
downloads new firmware to all of the
EMMs in the storage array
enclosure
• The parameter, which
downloads new firmware to a specific
EMM. If you need to download new
firmware to more than one EMM, but
not all RAID controller modules, you
must enter this command for each
storage array.
File path and file name of the file that
contains the firmware image. You must
put quotation marks (" ") around the
firmware image file path and file name.
Script Commands
parameter, which
159