Set Session - Dell PowerVault MD3220 Cli Manual

The portSpeed option is expressed as megabits per second (Mb/s). The
following values are the default values for the iscsiHostOptions:
• The IPv6HopLimit option is 64.
• The IPv6NdReachableTime option is 30000 milliseconds.
• The IPv6NdRetransmitTime option is 1000 milliseconds.
• The IPv6NdTimeOut option is 30000 milliseconds.
• The tcpListeningPort parameter is 3260.
Values for the portSpeed option of the iscsiHostPort parameter are in
megabits per second (Mb/s).

Set Session

This command defines how you want the current script engine session to run.
Syntax
set session errorAction=(stop | continue)
password="storageArrayPassword"
performanceMonitorInterval=intervalValue
performanceMonitorIterations=iterationValue
Parameters
Parameter
errorAction
password
204
Script Commands
Description
How the session responds if an error is
encountered during processing. You can
choose to stop the session if an error is
encountered, or you can continue the
session after encountering an error. The
default value is stop. (This parameter
defines the action for execution errors,
not syntax errors. Some error conditions
might override the continue value.)
The password for the storage array.
Enclose the password in double
quotation marks (" ").