Dell PowerVault MD3220 Cli Manual page 144

Parameter
repositoryVolumeGroupUserLabel Use this parameter when you create a new
repositoryDiskGroup
userLabel
enclosureLossProtect
driveMediaType
144
Script Commands
Description
disk group.
The name of a new disk group to be used
for the repository virtual disk. Enclose the
repository disk group name in double
quotation marks (" ").
Sequence number of the disk group where
the repository virtual disk is located.
The name to give the snapshot virtual
disk. You must put quotation marks (" ")
around the snapshot virtual disk name.
Specifies that enclosure loss protection is
enforced when creating the repository. To
enforce enclosure loss protection, set this
parameter to TRUE. The default setting
is FALSE. For information about the
enclosureLossProtect parameter, see
"Enclosure Loss Protection" on page 52.
The type of physical disk media that you
want to use for the disk group. Valid
physical disk media consists of:
• HDD — Use this option when you have
hard physical disks in the expansion
enclosure.
• SSD — Use this option when you have
solid state physical disks in the
expansion enclosure.
• unknown —Use if you are not sure what
types of physical disk media are in the
expansion enclosure.
• allMedia — Use this option when you
want to use all types of physical disk
media that are in the expansion
enclosure.