Dell PowerVault MD3220 Cli Manual page 135

Parameters
Parameter
diskGroup
userLabel
freeCapacityArea
Description
Sequence number of the disk group in
which to create the new virtual disk.
(To determine the sequence numbers of
the disk groups in your storage array, enter
the show storageArray Profile command.)
Name for the new virtual disk. You must
put quotation marks (" ") around the new
virtual disk name.
NOTE:
You can use any combination of
alphanumeric characters, hyphens, and
underscores for the names. Spaces are not
allowed. Command names can have a
maximum of 30 characters. If you exceed
the maximum character limit, replace
square brackets ([ ]) with angle brackets
(< >) to overcome this limitation.
Index number of the free space in an
existing disk group to use to create the
new virtual disk. Free capacity is defined
as the free capacity between existing
virtual disks in a disk group. For example, a
disk group might have the following areas:
virtual disk 1, free capacity, virtual disk 2,
free capacity, virtual disk 3, free capacity.
To use the free capacity following virtual
disk 2, specify:
freeCapacityArea=2
Use the show diskGroup command to
determine if the free capacity area exists.
Script Commands
135