Dell PowerVault MD3220 Cli Manual page 143

repositoryPercentOfSource=percentValue
repositoryUserLabel="repositoryName"
repositoryFullPolicy=(failSourceWrites |
failSnapshot)]
Syntax (Existing Repository Disk Group)
create snapshotVirtualDisk
sourceVirtualDisk="sourceVirtualDiskName"
[repositoryDiskGroup="repositoryDiskGroupName"
repositoryUserLabel="repositoryName"
freeCapacityArea=freeCapacityIndexNumber
userLabel="snapshotVirtualDiskName"
warningThresholdPercent=percentValue
repositoryPercentOfSource=percentValue
repositoryFullPolicy=(failSourceWrites |
failSnapshot)]
Parameters
Parameter
sourceVirtualDisk
repositoryRAIDLevel
repositoryPhysicalDisks
repositoryDriveCount
Description
Name of the source virtual disk from
which to take a snapshot. You must put
quotation marks (" ") around the source
virtual disk name.
RAID level for the repository virtual disk.
Valid values are 0, 1, 5, or 6.
Specifies the physical disks to assign to
the repository. Specify the enclosure ID
and slot ID for each physical disk assigned
to the virtual disk. Enclosure ID values
are 0 to 99. Slot ID values are 0 to 31. You
must put parentheses around the list of
repository physical disks.
Number of unassigned physical disks to
use for the repository virtual disk.
Script Commands
143