Use The Spray Brush - MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual

Earlier in the tutorial, you used the paintbrush attribute to extend a graphic
symbol along a path. Now you'll use the spray brush attribute to repeat a graphic
symbol—in this case, the bead—along a path.
With the bead on page 1 selected, choose Modify > Brush > Create Brush.
1
In the Edit Brush dialog box, name the brush Necklace.
2
Select Spray.
3
In the Min. percentage text box to the right of Spacing, type 85, then click OK.
4
On page 1, select the path, which is already created for you next to the
5
existing necklaces.