MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 194

Choose a category from the Attribute pop-up menu:
3
•
Choose Color to select a color to change. Specify the colors using the pop-up
menus under From and To. Select Include Tints to search for tints of the From
base color. For more information on color, see "Color, Strokes, and Fills" on
page 257.
•
Choose Stroke Width to find strokes within the width range you specify using
the Min and Max pop-up menus. For example, to search for widths from 2 to 8
points, you would enter 2 points in the Min text box and 8 points in the Min
text box. To search for a specific width, enter the width in the Min text box and
leave the Max text box empty.
•
Choose Font to search for a specific font and size.
•
Choose Remove to search for and remove Invisible Objects, Overprinting,
Custom Halftones, or Contents.
•
Choose Path Shape to search for all paths of a designated shape, fill, and stroke.
To specify the path to search for, copy the path and click Paste In to the right of
the From box. Do the same in the To box for the path you wish to replace the
original path.
If you choose Path shape, you can select Transform to Fit Original to keep the
original object's dimensions for the new object.
•
Choose Simplify to specify the number of points a path must contain; for
Allowable Change, enter a value or drag the slider to set the replacement
number of points.
•
Choose Rotate to set the rotation angle to rotate objects around their
individual center points.
•
Choose Scale to enter a scale factor to scale objects. To scale objects
proportionally, enter the same percentage in both the X and Y text boxes.
•
Choose Blend Steps to enter the number of steps to search for. In the pop-up
menu, choose Resample At to resample at the current printer output
resolution.
Click Change.
4