MACROMEDIA FREEHAND 10-USING FREEHAND Use Manual page 111

Click Add.
7
Repeat steps 3 through 7 to set additional horizontal or vertical guides.
8
Click OK.
9
Choose View > Guides > Snap to Guides.
This command toggles between snapping and not snapping. A check mark
by the menu item indicates that snapping behavior is active. Snap to Guides
is active by default.
The Pointer tool displays a horizontal or vertical triangle when objects snap to the
corresponding guide.
Choose View > Guides > Lock.
This command toggles between locking and unlocking the guides. A check mark
by the menu item indicates that the guides are locked. The guides are unlocked
by default.
Do one of the following:
1
•
Choose View > Guides > Edit.
•
Double-click an existing guide.
Select the guide you want to modify.
2
To modify more than one guide at a time, Control-click (Windows) or
Command-click (Macintosh). Shift-click to select contiguous guides.