Set Vertical Position; Set Relative Vertical Position - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Set vertical position

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|

Set relative vertical position

|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
180
SureMark Printers User's Guide
RS-485 Syntax:
X'1D;24;y'
RS-232 Syntax:
GS $ y or X'1D;24;y'
where:
y is a two-byte vertical printing position (in dots)
Remarks:
v Applies to page mode only.
v Moves the printing position to the specified dot position perpendicular to
the printing direction specified by the Select printing direction command.
If printing direction is bottom-to-top, or top-to-bottom, this command
adjusts the printing position in the horizontal direction.
v If the value of y is outside the specified printable area, this command is
ignored.
RS-485 Syntax:
X'1D;5C;y'
RS-232 Syntax:
GS \ y or X'1D;5C;y'
where:
y is the two-byte vertical printing position (in dots).
Remarks:
v Applies to page mode only.
v Moves the printing position the specified number of dots from the current
print position, in the direction perpendicular to the printing direction
specified by the Select printing direction/position command (X'1B;54...'). If
the print direction is bottom-to-top, or top-to-bottom, this command
adjusts the printing position in the horizontal direction.
v If the value of y is outside the specified printable area defined by the
Select printable area command, this command is ignored.
August 24, 2004