Paper Cut/Di Eject; Generate Drive Pulse For Cash Drawer; Retrieve The Flash Storage - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Paper cut/DI eject

Generate drive pulse for cash drawer

| |

Retrieve the flash storage

156
SureMark Printers User's Guide
05
06-FF Reserved
Purpose:
To move the printhead to the desired location.
Remarks:
Valid at the beginning of the line only. Valid in impact print stations only.
RS-232 Syntax:
ESC i or ESC m or X'1B69 or 1B;6D'
Purpose:
To cut the paper in the customer receipt (CR) station.
Remarks:
v This command is the equivalent of a form feed (0C) in the document
insert (DI) station but does not feed the customer receipt in the CR
station.
v ESC i or X'1B69' does not increment status byte 6.
v ESC m or X'1B6D' does increment status byte 6.
RS-232 Syntax:
ESC p m n1 n2 or X'1B70;m;n1;n2'
where:
m The cash drawer number - 0 or 1.
n1 Pulse width on time = (n1 × 2) milliseconds.
n2 Pulse width off time = (n2 × 2) milliseconds.
Purpose:
To open one of the cash drawers attached to the printer.
Remarks:
Printing will be suspended while a cash drawer is being opened.
RS-232 Syntax:
ESC 4 n1 n2 or X'1B;34;n1;n2'
where:
n1 One-byte count of the bytes to be returned
n2 Three-byte address of the first byte to be returned
Purpose:
Retrieve data from user flash storage.
Remarks:
One byte will be returned if a byte count of X'00' is specified.
Register document
v Close throat if open
v Advance paper forward to first position
August 24, 2004