Code; Character Fonts; Thermal Printing Font - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Code page 865
Figure 45. Code Page 865

Character fonts

This section describes font capabilities. For more information about font-related
commands, see:
v "Download user-defined characters" on page 116
v "Set print station" on page 131
v "Set print mode" on page 127
v "Set code page" on page 131
v "Set inter-character spacing" on page 132
v "Select user-defined or resident character sets" on page 131

Thermal printing font

There are three font sizes for the resident character set on Models TI3, TI4, TI8,
TG3, TG4, TF6, and TM6 (only fonts A and B are available for Models TI1 and TI2):
v Font A is 10 dots (wide) × 20 dots (high) with the last 2-dot row used for
v Font B is 12 dots (wide) × 24 dots (high) with the last 2-dot row used for
v Font C is 8 dots (wide) × 16 dots (high) with the last 2-dot row used for
94
SureMark Printers User's Guide
descenders (1.25-mm × 2.5-mm character height including descenders, 1.25 mm
× 2.25 mm excluding descenders).
descenders (1.5-mm × 3.0-mm character height including descenders, 1.5 mm ×
2.75 mm excluding descenders).
descenders (1.0-mm × 2.0-mm character height including descenders, 1.0 mm ×
1.75 mm excluding descenders).
August 24, 2004