Print And Feed Paper N Lines; Print And Feed Paper Using Minimum Units; Print Graphic Messages; Select And Print A Graphics (Logo) Command - IBM 4610-TM6 - SureMark Printer TM6 Two-color Thermal Transfer User Manual

Print and feed paper n lines

Print and feed paper using minimum units

|
|
|

Print graphic messages

Select and print a graphics (logo) command

152
SureMark Printers User's Guide
RS-232 Syntax:
ESC d n or X'1B64;n'
where:
n Specifies the number of line feeds.
Purpose:
Prints data in the print buffer and feeds the paper by the amount specified
in this command.
RS-232 Syntax:
ESC J n or X'1B4A;n'
where:
n Specifies the line feed steps.
In the receipt station: 1 in. = 204 steps (1 mm = 8 steps).
In the document portrait station: 1 in. = 51 steps (1 mm = 2 steps).
In the document landscape station: 1 in. = 127 steps (1 mm = 5
steps).
Purpose:
Prints data in the print buffer and feeds the paper by the amount specified
in this command.
RS-232 Syntax:
ESC * d w h data or X'1B2A;d;w;h;data'
where:
d Dot density.
00
01
02
Normal Print - 200 dpi in the receipt station, 150 dpi in the
document station.
Note: In the document station, this takes three passes of
the printhead for a logo that is 8 dots high.
Double wide - 100 dpi in the receipt station, 75 dpi in the
document station.
Note: In the document station, this takes one pass of the
printhead for a logo that is 8 dots high.
Double wide and high - 100 dpi in the receipt station, 75 dpi
in the document station. Every dot row in the vertical
direction will be printed twice.
August 24, 2004