Default:
Remarks:
Set inter-character spacing
RS-232 Syntax:
where:
Default:
Maximum:
Remarks:
Set or cancel rotated characters
RS-232 Syntax:
where:
Default:
Remarks:
132
SureMark Printers User's Guide
n = 01
Changing code pages is valid for resident character sets only. If
user-defined character sets are enabled, this command will not do anything.
ESC SP n or X'1B20;n'
n
The number of dot-spaces in the thermal print station or half-dot
spaces in the impact print station.
n = 03
n = 08
If you select double-width printing, the space to the right of each character
is doubled.
ESC V n or X'1B56;n'
n=00
Cancel Rotated Characters
n=01
Set Rotated Character
n=02
Code Page 863 - Canadian-French
n = 00
Rotation is 90 degrees clockwise. This command is supported only in the
thermal print station.
August 24, 2004