S-Registers - US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Command Reference Manual

S-Registers

Syntax
S<register_number>?
S<register_number>=<value>*
Note:* Some registers are read only and are not affected by the S<register number>=<value> command.
The current setting of each S-register may be displayed by the S<register
number>? command. There are two forms for this command.
Table 5-2: S<register number> Extended Syntax
Displays register contents.
Sets the contents of the register to <value>.
56K Softmodem
Command Reference
Function
- 84