Table of Contents
Advertisement
mation on the standardized version of this command, refer to ITU-T recommendation V.250.
Value
0
V.42 L-SIGNAL does not indicate break signal length.
1
V.42 L-SIGNAL indicates break signal length.
Value
0
Modem does not deliver a break to the DTE.
1—255
Modem delivers a break of the length set by the <default_length> parameter.
Command
+EB=<break selection>,<timed>, <default length>
+EB?
+EB=?
+EFRAM=<value 1>,<value 2>—Frame Length
Result codes:
Valid <timed> Values
Table 3-70:
Table 3-71: Valid <default_length> Values
Table 3-72: +EB Extended Syntax Commands
Use this command to set the maximum link-layer frame information field size that
the 56K Softmodem attempts to establish. <value 1> defines the field size for the
sending direction in octets. <value 2> defines the field size for the receiving
direction in octets and is not required.
OK if <value 1> = 8, 16, 32, 64, 128, 256 and <value 2> = 0
ERROR if <value 1> does not equal 8, 16, 32, 64, 128, 256 or <value 2> does not
equal 0
Meaning
Meaning
Description
Sets the modem behavior when a break is received.
Displays the current break selection settings.
Displays the supported break selection settings.
56K Softmodem
Command Reference
- 41
Advertisement
Table of Contents
