S-Registers - US Robotics 002605-00 Manual

S-Registers

To change a setting, use the ATSr=n command, where r is the register and n is a decimal
value from 0 255 (unless otherwise indicated).
Register Default
S0 0
S1 0
S2 43
S3 13
S4 10
S5 8
158
P III: S
ART ECTION
Function
Sets the number of rings on which to answer in Auto Answer Mode. When set to
0, Auto Answer is disabled.
Counts and stores the number of rings from an incoming call. (S0 must be greater
than 0.)
Stores the ASCII decimal code for the escape code character. Default character is
+. A value of 128 – 255 disables the escape code.
Stores the ASCII code for the Carriage Return character. Valid range is
127.
Stores the ASCII decimal code for the Line Feed character. Valid range is 0 –
127.
Stores the ASCII decimal code for the Backspace character. A value of
255 disables the Backspace key's delete function.
D: T Q
ECHNICAL UICK
R
EFERENCE
0 –
128