Ftm=<Mod>-Transmit Fax Data With <Mod> Carrier - US Robotics 56 K SOFTMODEM - COMMAND REFERENCE REV 1 Command Reference Manual

Result codes:
Command
+FTH=3
+FTH=24
+FTH=48
+FTH=72
+FTH=96
+FTH=73
+FTH=74
+FTH=97
+FTH=98
+FTH=121
+FTH=122
+FTH=145
+FTH=146
Command
+FTH=<mod>
+FTH=?
+FTM=<mod>—Transmit FAX Data with <mod> Carrier
Result codes:
CONNECT if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and
the connection is established. This is an intermediate result code.
OK if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and the
connection is established. This is a final result code.
ERROR if <mod>
145, 146 or the connection is not established. This is a final result code.
Table 4-12: +FTH Commands
Modulation
V.21 channel 2.
V.27ter.
V.27ter.
V.29.
V.29.
V.17.
V.17 (short train).
V.17.
V.17 (short train).
V.17.
V.17 (short train).
V.17.
V.17 (short train).
Table 4-13: +FTH Extended Syntax Commands
Sets the FAX transmit rate and frames the data using HDLC protocol.
Displays all available parameter values for the +FTH command.
+FTM=<mod> command causes the modem to transmit data using the
modulation defined by Table 4-14: +FTM Commands on page 68.
CONNECT if <mod> = 3, 24, 48, 72—74, 96—98, 121, 122, 145, 146 and
the connection is established. This is an intermediate result code.
does not equal 3, 24, 48, 72—74, 96—98, 121, 122,
300 bits/s.
2400 bits/s.
4800 bits/s.
7200 bits/s.
9600 bits/s.
7200 bits/s.
7200 bits/s.
9600 bits/s.
9600 bits/s.
12000 bits/s.
12000 bits/s.
14400 bits/s.
14400 bits/s.
Description
56K Softmodem
Command Reference
Speed
- 67